Error code F02

If your washing machine displays the error code F02, there are problems with emptying the water.

Error code F02 can be solved by cleaning the fiber screen. If cleaning the fiber screen does not work, it is typically the drain pump that is defective.

Error code F03

If your washing machine displays the error code F03, an error has been detected with the level control.

With error code F03, it is likely that the washing machine's level control is faulty.

Error code F05

Error code F05 indicates temperature error.

If your washing machine displays the error code F05, it is typically because the NTC sensor is defective.

Error code F06

If your washing machine shows error code F06, there is a fault with the commutator.

Error code F06 typically occurs due to worn engine carbon. Replace the motor carbon to clear the error code.

Error code F07

If your washing machine shows error code F07, there is a fault with the commutator.

If your washing machine displays the error code F07, it is typically because the control module is defective.

Error code F08

Error code F08 indicates a fault with the heater.

If your washing machine displays the error code F08, it typically occurs when the heating element is defective. This typically occurs when you do not descale your washing machine.

Error code F09

Error code F09 indicates fault with commutator.

If your washing machine displays the error code F09, it is typically due to worn motor carbon.

Error code F10

Error code F10 indicates engine failure.

Error code F10 can occur due to several defective parts. We recommend contacting us on: 98 18 21 00 to find a solution.

Error code F11

Error code 4E indicates a fault with the electronics.

Error code F11 can both be caused by a faulty control module, but other faulty parts in the washing machine can also cause error code F11 to occur. We recommend contacting us on: 98 18 21 00 to find a solution.

Error code F12

Error code F12 indicates registered at the bottom of the washing machine.

If your washing machine displays the error code F12, it is typically due to a leak. By following the limescale trace, you can find the part that is the cause of the leak and then replace the defective part.

Error code F13

Error code F13 indicates electronics.

If your washing machine displays the error code F13, it is typically due to a faulty control module. In some cases, there may be several defective parts that are responsible for error code F13.

Error code F14

If your washing machine displays the error code F14, there are problems emptying the water from the washing machine.

If your washing machine displays the error code F14 may indicate a faulty control module. In some cases, there may be several defective parts that are responsible for error code F14.

Error code F15

Error code F15 error with electronics.

If your washing machine displays the error code F15, it may indicate a faulty control module. In some cases, there may be several defective parts that are responsible for error code F15.

Error code F18

Error code F18 indicates too much detergent

Error code F18 occurs when too much detergent has been added to the soap compartment. This will form too much foam which will then trigger error code F18. You can solve the problem by using less detergent.

Error code F19

If your washing machine displays the error code F19, it indicates a fault with the commutator

Error code F19 typically occurs when the engine carbons have worn out.

Error code F20

If your washing machine displays the error code F20, there is a fault with the commutator

Error code F20 typically occurs when the engine carbons have worn out.

Error code F21

Error code F21 indicates problems with draining the water out of the washing machine.

Error code F21 can be solved by cleaning the fiber screen. If cleaning the fiber screen does not work, it is typically the drain pump that is defective.

Error code F22

If your washing machine displays the error code F22, there is a fault in the door lock or the control module.

With error code F22, the error code typically occurs when the control module is defective, but in other cases it can be several defective parts.

Error code F23

If your washing machine displays the error code F23 water level error.

Error code typically occurs when the level control is faulty.

Error code F24

If your washing machine displays the error code F24, there is a temperature error.

Error code 14E typically occurs when the ntc sensor is defective.

Error code F25

If your washing machine displays the error code F25, there is a motor fault.

Error code F25 can be caused by several different defective parts. We recommend contacting us on: 98 18 21 00

Error code F26

If your washing machine displays the error code F26, the door is open.

With error code F26, the door is open. Close the door. If closing the door does not solve the problem, the door lock is faulty.

Error code F27

If your washing machine displays the error code F27, there is an overflow error.

Error code F27 occurs when too much water has been detected in the washing machine. This may be due to a faulty solenoid valve. If your washing machine is not filled with water, it is typically the level control that is faulty.

Error code F28

If your washing machine displays the error code F28, there is a fault with the electronics.

Error code F28 can both be caused by a faulty control module, but other faulty parts in the washing machine can also cause error code F28 to occur. We recommend contacting us on: 98 18 21 00 to find a solution.

Find control module here

Error code F29

If your washing machine shows the error code DC, the door is open.

For error code DC, close the door to solve the problem. If closing the door does not resolve error code DC, the door lock is faulty.

Error code F32

If your washing machine displays the error code F32, an error has been detected with the level control.

Error code F32 typically occurs when the level control is faulty.

Find level control here

Error code F33

If your washing machine displays the error code F33, there is a fault with the electronics.

Error code F28 can both be caused by a faulty control module, but other faulty parts in the washing machine can also cause error code F28 to occur. We recommend contacting us on: 98 18 21 00 to find a solution.

Error code FDL

If your washing machine displays the error code FDL, the door is open.

With error code FDL, the door is open. Close the door. If closing the door does not solve the problem, the door lock is faulty.

Error code FDU

If your washing machine displays the error code FDU, the door is open.

With error code FDU, the door is open. Close the door. If closing the door does not solve the problem, the door lock is faulty.