When the washing machine does not wash cleanly, try the following:

Step 1:

If your washing machine does not wash cleanly, the reason may be that the washing machine is overloaded. Do not load more laundry into the drum than it has capacity for. If there is too much laundry in the drum, the detergent will not dissolve properly and this can result in soap stains on the laundry and still dirty laundry. A good rule of thumb is that you should be able to fit your clenched fist in the space above the laundry without squeezing the clothes together.

Step 2:

If your washing machine does not wash cleanly, the reason may be that you are either using too much or too little detergent. The dosage of detergent is important, as too little detergent will result in the washing machine not being able to wash cleanly - and too much detergent means that the washing machine cannot dissolve it all. This results in deposits on the drum. The coatings can both cause stains on the clothes and at the same time shorten the life of the washing machine.

Step 3:

It may also be because the washing machine needs to be cleaned. You wash your laundry in the washing machine - but you must also remember to clean the washing machine so that it can do its job as well as possible. You can buy our washing machine cleaner so that you can once again have laundry that is both clean and smells freshly washed.

Find here

Step 4:

If your washing machine does not wash cleanly, the reason may be that the washing machine does not heat the water. Here you can read the reason why your washing machine does not heat the water.

Step 5:

If your washing machine does not wash cleanly, the reason may be that there is an error with the water level. If there is too little water in the washing machine, it will not wash the clothes optimally. The pressure switch (level control) may be defective and, if necessary, must be replaced.

Find here

Step 6:

If your washing machine does not wash cleanly, the reason may be that the pressure switch hose is blocked - and then the pressure switch (level control) does not work. You can remove the hose and rinse it clean, so that there is free passage again.

Step 7:

If your washing machine does not wash cleanly, the reason may also be that the belt on the washing machine is broken. This will result in the drum not rotating during washing. Check if the drum rotates during washing.

Find here