Error code E5

If your Bosch washing machine displays error code E5, it is either the inlet hose with aquastop or a solenoid valve that is faulty. Find new parts below.

Error code E06

If your washing machine displays the error code E06, there is a fault with the door sensor.

If your washing machine has error code E06, your washing machine has a faulty door sensor, but can sometimes also be caused by a faulty door lock. Find new door sensor and door lock below.

Error code E10

Error code E10 indicates an error with the water supply.

If your washing machine displays the error code E10, the washing machine does not take in enough water within a certain period of time. This may be due to:

• The drain hose does not hang high enough. Raising the drain hose above the drum will typically solve the problem. However, this problem occurs when the washing machine is raised.
• If your drain hose is raised high but an error code E10 still occurs, check for kinks in the drain hose.
• Also check the water supply. You do this by unscrewing the hose from the tap, possibly putting a bucket under the tap and then turning on the water.
• If your washing machine still displays error code E10 after trying the steps above, it is likely a faulty aquastop that is causing error code E10.

Error code E17

Error code E17 occurs when a leak where water has arisen at the bottom of your washing machine. When the error code is activated, the door of the washing machine will be locked and it will therefore not be possible to get hold of the clothes in the washing machine. You can do this to access the clothes.

1. Tip the washing machine 90 degrees. This step will cause the water to drain from the float, which is the part that detects flooding of the washing machine. By tipping the washing machine 90 degrees the water will collect away from the float, this will stop error code E17 and it is now possible to open the door.
2. By finding the leak, you will ensure that E17 will not appear again. Follow the lime trail to the leak. The leak is typically caused by a leaky gasket or a cracked hose.

Error code E18

Error code E20 indicates that the washing machine cannot get rid of the water.

1. The error can occur if there is a kink in the hose. Fix the crack so that the water can access the washing machine.
2. If you don't find any cracks, it could be a dirty piece of wood causing problems. You will find the fiber screen behind the cleaning door at the bottom of the washing machine. Take out the sieve and remove dirt and debris from the sieve.
3. It can't just be the wire mesh that needs cleaning. The drain pump may also contain dirt. You can find the drain pump sitting behind the sieve. Also check whether the pump vane can rotate. You can check this with a finger. If it does not rotate, the pump is defective. You can find a drain pump below.
4. If the error code is still displayed after cleaning both the fiber screen and the drain pump, it may be that the drain pump is clogged. Remove the drain hose from the washing machine and blow into it. If there is resistance while breathing, the drain hose is blocked. You can remove the dirt with a curtain spiral, a wooden strip or similar. For best results, soak the drain hose in lukewarm water first.
5. When you have gone through all the steps and still experience problems with Error code E20, it is probably the drain pump that is faulty. This applies regardless of whether the pump vanes are turning or not.

Error code E21

If your washing machine has code E21, there is a fault with the commutator.

If your washing machine displays the error code E21, it is probably the motor carbon that is faulty.

Error code E23

Error code E23 indicates water registered at the bottom of the washing machine.

Error code E23 error code typically occurs due to a defective gasket or hose. Using the lime trace, you can find the defective part.

Error code E32

Error code E32 indicates imbalance detected.

The error code E32 occurs when the washing machine is not fully loaded with laundry. This is typically due to when you want to wash bed linen or bath towels. If you wash a large bed linen at a time, it can create an imbalance in the washing machine and will therefore show error code E32. It can also be caused by a faulty level control. Find a level control below.

Error code E33

Error code E33 indicates a fault with the electronics or drain pump.

Error code E33 typically occurs if foam is formed due to too much detergent, and in certain cases will seep out through the soap compartment.

Error code E34

Error code E34 indicates that the door is open.

If your washing machine displays the error code E30, the washing machine door is open. Closing it will fix the problem. If the washing machine will not close, the door lock is faulty.

Error code E31

Error code E31 error with the water level.

If your washing machine displays the error code E31, it is probably a faulty level control which gives error code E31.

Error code E32

Error code E32 indicates an error with the water level.

If your washing machine displays the error code E32, it is probably a faulty level control which gives error code E32.

Error code E33

Error code E33 indicates an error with the water level.

If your washing machine displays the error code E33, it is probably a faulty level control which gives error code E33.

Error code E34

If your washing machine displays the error code E34, there is an error with the water level.

The error code E34 you can solve the error code by closing the door. If it still shows the error code, the door lock may be faulty. You can find a door lock below.

Error code E57

If your washing machine displays the error code E57, there is an error with the water level.

The error code E57 you can solve the error code by closing the door. If it still shows the error code, the door lock may be faulty. You can find a door lock below.

Error code F01

Error code F01 indicates a fault with the water supply.

The error code F01 occurs due to a faulty solenoid valve. Find a solenoid valve underneath.

Error code F02

Error code F02 indicates failure with heating.

Error code F02 typically occurs when the heater has become defective. Find a new heater below.

Error code F03

If your washing machine displays the error code F03, there is an error with pumping out.

The error code F03 is due to a faulty drain pump.

Error code F04

If your washing machine displays the error code F04, there is a fault with the commutator.

If your washing machine displays the error code F04, it typically occurs when the motor carbon has worn out. To solve error code F04, you need to replace the engine carbon.

Error code F05

If your washing machine displays the error code F05, there is a fault with the commutator.

If your washing machine displays the error code F05, it typically occurs when the motor carbon has worn out. To solve error code F05, you need to replace the engine carbon.

Error code F08

If your washing machine displays the error code F08, the door is open.

Error code F08 occurs when the door is open. Closing the door will stop error code F08. If the door cannot be closed, the door lock has typically become defective.

Error code F16

If your washing machine displays the error code F16, the door is open.

Error code F16 occurs when the door is open. Closing the door will stop error code F16. If the door cannot be closed, the door lock has typically become defective.

Error code F17

If your washing machine displays the error code F17, there is an error with the water supply.

Error code F17 is typically caused by either the inlet hose with aquastop or the solenoid valve being defective.

Error code F18

If your washing machine displays the error code F18, the washing machine cannot drain the water.

• Check for kinks in the drain hose. Fixing the kink will in most cases resolve error code F18.
• Error code E18 occurs when the washing machine takes too long to drain the water. It could be a clogged filter, clogged drain hose or a fault in the drain pump.
• If cleaning the filter is not enough to get the washing machine running again, the drain hose is probably blocked. Detach the hose and blow into it. If there is resistance, the drain hose is blocked. In some cases, you may be lucky to have the foreign object blown out of the tube. However, in other cases, it will be necessary to be able to take out the foreign body with a tool such as a curtain spiral.

If the error still occurs, the drain pump must be replaced. Find a drain pump underneath.

Error code F21

If your washing machine shows the error code F21 fault with commutator.

Error code F21 typically occurs when the engine carbon is worn out or the engine management fails for other reasons.

• Reset the control module.
  • Turn the knob to off.
  • Close the washing machine door.
  • Turn the knob 180 degrees downwards.
  • Wait a few seconds until start/pause starts flashing.
  • Press and hold the spin button.
  • While still holding the spin knob, turn the knob to the "7 o'clock" position.
  • Wait for a few seconds and release the spin button and turn the button to the off position. Check if the error code is resolved with this.

Error code F23

If your washing machine displays the error code F23, water has been detected at the bottom of the washing machine.

Error code F23 occurs when there is water under the washing machine so the aquastop is activated. Tilt the washing machine approx. 90 degrees to get the water out of the washing machine. If tilting the washing machine does not help, you can remove the back panel to remove the water from the bottom of the washing machine.

Error code E29

If your washing machine displays the error code E29, an error has been detected in the water supply.

1. If the error code occurs while the program is still running, it is a sign that the drain hose is raised above the height of the drum. This often happens when the washing machine is on a raised platform. By raising the drain hose above the height of the drum, you will solve the problem.
2. If the error still occurs after you have done the above, we recommend checking for a kink in the inlet hose on the washing machine. A kink in the inlet hose will prevent the water from being delivered to the washing machine.
3. There may be problems with the water supply. Unscrew the hose from the tap, put a bucket under the tap and turn on the water.
4. If the water supply is OK, we would recommend checking the filters in the inlet hose. It may be that the inlet hose is limescaled, therefore descale the filter between the tap and the inlet hose and the filter at the back of the washing machine.
5. If you have gone through the steps above and the error code E29 won't let you down, it may be because the aqua stop on the washing machine's inlet hose is activated and therefore stops the water before it reaches the machine. You can buy an aquastop below.

Error code F29

If your washing machine displays the error code F29, an error has been detected with the water supply.

The error code F01 occurs due to an inlet hose or a defective solenoid valve. Find a solenoid valve and inlet hose underneath.

Error code F32

If your washing machine displays the error code F32, an incorrect water temperature has been registered.

The error code F32 occurs when the washing machine is not fully loaded with laundry. This is typically due to when you want to wash bed linen or bath towels. If you wash a large bed linen at a time, it can create an imbalance in the washing machine and will therefore show error code F32. It can also be caused by a faulty level control. Find a level control below.

Error code F33

If your washing machine displays the error code F33, it indicates that too much detergent has been used.

Error code F33 typically occurs if foam is formed due to too much detergent, and in certain cases will seep out through the soap compartment.

Error code F34

If your washing machine displays the error code F34, the door is open.

With error code F34, the door is open on the washing machine. Closing the door will clear the error code. If the door will not close, the door lock is faulty.

Error code F37

If your washing machine displays the error code F37, an error has been detected with the commutator.

Error code F37 typically occurs when the ntc sensor is defective.

Error code F43

If your washing machine displays the error code F43, an error has been detected with the commutator.

With error code F43, there are problems with the engine.

• Check the connection from the motor to the parts to which the motor is directly connected. If necessary, try disconnecting all the wires and reconnecting them. This is to check if a loose connection is the problem.
• It may be that the motor carbon has worn out. Check the motor carbon and replace the motor carbon if worn.
• If there is no loose connection and the engine carbon is as it should be, it may be the engine that is at fault. You can find a new engine below.
  Find engine coal here Find engine here

Error code F44

If your washing machine displays the error code F44, an error has been detected with the commutator

Error code F44 typically occurs when the motor carbon has worn out.

Error code F57

If your washing machine displays the error code F57, there is a fault with the electronics.

• Check the connection from the control module to all other parts to which it is connected.
• If you find no loose connections, you should disconnect all parts to the control module and then reconnect them one by one.
• If you have tried the above steps and still experience the error code F57, the control modules or the engine management are faulty.

Error code F67

If your washing machine displays the error code F67, there is a fault with the electronics or motor.

Fault code F67 can both occur due to a faulty control module, but also worn engine carbons or a faulty engine. We recommend contacting us on: 98 18 21 00 to find a solution.

Error code KEY

If your washing machine displays the error code E91, the child lock is activated.

The error code KEY is a sign that the child lock is activated. To remove the error code, the child lock must be switched off. If your washing machine has the Finished or - and + buttons, you can try to hold these down at the same time for approx. 3 seconds. If your washing machine does not have the same layout, you must refer to your washing machine's user manual.