Error code IE

If your LG washing machine has the error code IE, there is an error with the water supply.

Error code IE typically occurs when the solenoid valve is defective.

Error code UE

If your Hotpoint washing machine has the error code UE, Unbalance has been registered.

Error code UE typically occurs when washing large pieces of clothing. By washing e.g. bedding, it will clump together and will therefore create an imbalance in the drum. You can solve this problem by putting more clothes in the washing machine so that it creates an equilibrium. If this does not solve the problem it may be a sign of a faulty level control.

Error code 0E

If your LG washing machine has error code 0E, your washing machine has problems draining the water.

1. The error can occur if there is a kink in the hose. Fix the crack so that the water can access the washing machine.
2. If you don't find any cracks, it could be a dirty piece of wood causing problems. You will find the fiber screen behind the cleaning door at the bottom of the washing machine. Take out the sieve and remove dirt and debris from the sieve.
3. It can't just be the wire mesh that needs cleaning. The drain pump may also contain dirt. You can find the drain pump sitting behind the sieve. Also check whether the pump vane can rotate. You can check this with a finger. If it does not rotate, the pump is defective. You can find a drain pump below.
4. If the error code is still displayed after cleaning both the fiber screen and the drain pump, it may be that the drain pump is clogged. Remove the drain hose from the washing machine and blow into it. If there is resistance while breathing, the drain hose is blocked. You can remove the dirt with a curtain spiral, a wooden strip or similar. For best results, soak the drain hose in lukewarm water first.
5. When you have gone through all the steps and still experience problems with Error Code 0E, it is probably the drain pump that is faulty. This applies regardless of whether the pump vanes are turning or not

Error code FE

Error code FE occurs when there is a water level error.

If your LG washing machine shows Error code FE, it is typically the solenoid valve that is faulty.

Error code PE

If your LG washing machine has the error code PE, your washing machine has detected an error with the level control.

Error code PE typically occurs when the level control is faulty.

Error code DE

Error code DE occurs when the door is open.

If your LG washing machine has the error code DE, your washing machine door is open. By closing the door, you can resolve error code DE. If closing the door does not help, it may be a sign of a faulty door lock.

Error code TE

Error code TE occurs when there are errors with heating errors.

If your LG washing machine has the error code TE, the heater or NTC sensor is faulty. If your washing machine can complete a cold wash programme, it is the heating element that is faulty.

Error code LE

Fault code LE occurs when there is a fault with the tachometer.

If your LG washing machine has the error code LE, it may be due to a faulty tachometer.

Error code EE

Error code F11 occurs when there is a fault with the electronics.

If your LG washing machine has the error code EE, it may be because the control module is faulty. However, error code EE can also occur when there are several electrical parts that are defective.

Error code PF

Error code PF occurs when there is a power failure.

Check the power cord and the voltage.