Where can I find the information on my product?
What information do I need?
To find spare parts for your product, you can search for resp. 1. Model or 2. Product number. If your product has a product number, you should search for it, as it is more specific than the model.
If your Grundig dishwasher shows error code E01, it is due to water in the bottom of the machine as a result of a leak inside the dishwasher. To fix this problem, you can follow these steps:
However, it is important to find the cause of error code E01, as the error code is likely to reoccur after a few wash cycles.
Blocked drain pump: Check if the drain pump is blocked. You can identify a faulty pump by listening for abnormal sounds or lack of activity when the dishwasher tries to pump water out.
Defective water valve: If the drain hose is intact, the fault may be due to a leak in the water valve. If there are visible traces of limescale around the water valve, it is likely that the valve is defective.
Defective flowmeter: The error code can also be caused by a faulty flow meter, which registers how much water enters the dishwasher. If the flow meter is faulty, the dishwasher will continue to add water until the bottom is full, resulting in error code E01.
Defective spray arms: Examine the spray arms to see if they have come apart at the assembly. If they are separated, you should consider replacing the spray arms.
These are potential causes of the error code E01 and it is important to inspect and correct the problem according to the specific cause in order to get your Grundig dishwasher working properly again.
Find drain pump here Find water valve here Find flowmeter here Find spray arms here
If your Grundig dishwasher shows error code E02, it is due to water in the bottom of the machine as a result of a leak inside the dishwasher. To fix this problem, you can follow these steps:
Error code E02 can also occur when the drain pump is faulty. See if anything is blocking the drain pump vane. This can be glass jars, food scraps or the like. If the drain pump is defective, you may experience that the dishwasher stalls during pumping or cannot empty the water out of the machine. This can be solved by replacing the drain pump.
