Error code E5

If your Gaggenau washing machine has error code E5, there is an error with the water supply.

• If your Gaggenau washing machine displays error code E5, it is either the inlet hose with aquastop or a solenoid valve that is defective. Find new parts below.

Error code E06

If your Gaggenau washing machine has the error code E06, your washing machine has a faulty heating element. Find a new heater below.

Error code E10

If your Gaggenau washing machine has error code E10, it is due to an error with heating

• Error code F05 typically occurs when the heater has become defective. Find a new heater below.

Error code E16

If your Gaggenau washing machine has error code E16, it is because the door is open

• Error code E16 typically occurs when the door is open on your washing machine. If the error occurs even after the door is closed, the door lock may be defective. Find a new door lock below.

Error code E17

If your Gaggenau washing machine has error code E17, it is due to water in the bottom of the washing machine.

Error code E17 occurs when a leak where water has arisen at the bottom of your washing machine. When the error code is activated, the door of the washing machine will be locked and it will therefore not be possible to get hold of the clothes in the washing machine. You can do this to access the clothes.

1. Tip the washing machine 90 degrees. This step will cause the water to drain from the float, which is the part that detects flooding of the washing machine. By tipping the washing machine 90 degrees the water will collect away from the float, this will stop error code E17 and it is now possible to open the door.
2. By finding the leak, you will ensure that E17 will not appear again. Follow the lime trail to the leak. The leak is typically caused by a leaky gasket or a cracked hose.

Error code E18

If your Gaggenau washing machine has error code E18 typically when there is a fault with the commutator.

Error code E18 occurs when the washing machine takes too long to drain the water. It could be a clogged filter, clogged drain hose or a fault in the drain pump.

If cleaning the filter is not enough to get the washing machine running again, the drain hose is probably blocked. Detach the hose and blow into it. If there is resistance, the drain hose is blocked. In some cases, you may be lucky to have the foreign object blown out of the tube. However, in other cases, it will be necessary to be able to take out the foreign body with a tool such as a curtain spiral.

If the error still occurs, the drain pump must be replaced. Find a drain pump underneath.

Error code E21

If your Gaggenau washing machine has error code E21 typically when there is a fault with the commutator.

• Error code E21 occurs when your washing machine's motor carbon has worn out. Find new motor carbon below.

Error code E23

If your Gaggenau washing machine has error code E23 when water is registered at the bottom of the washing machine.

• The error code E23 occurs when a gasket or hose is defective. Replace the part when you have followed the lime trace to the part that is defective.

Error code E32

If your Gaggenau washing machine has error code E32, an imbalance has been detected.

• The error code E32 occurs when the washing machine is not fully loaded with laundry. This is typically due to when you want to wash bed linen or bath towels. If you wash a large bed linen at a time, it can create an imbalance in the washing machine and will therefore show error code E32. It can also be caused by a faulty level control. Find a level control below.

Error code E33

If your Gaggenau washing machine has error code E33, too much detergent has been used

• Error code E33 typically occurs if foam is formed due to too much detergent, and in certain cases will seep out through the soap compartment.

Error code E34

If your Gaggenau washing machine has error code E34 when the door is open.

• The error code E34 occurs when the door is open. Closing the door will stop the error. If the error still occurs, the door lock is defective. Find a door lock below.

Error code E57

If your Gaggenau washing machine has error code E57 when the door is open.

• The error code E57 occurs when the door is open. Closing the door will stop the error. If the error still occurs, the door lock is defective. Find a door lock below.

Error code F01

If your Gaggenau washing machine has error code F01, there is an error with the water supply.

• The error code F01 occurs due to a faulty solenoid valve. Find a solenoid valve underneath.

Error code F02

If your Gaggenau washing machine has error code F02, too much detergent has been used

• The error code F02 typically occurs if foam is formed due to too much detergent, and in some cases will seep out through the soap compartment.

Error code F03

If your Gaggenau washing machine has error F03, there is an error with pumping out.

• The error code F03 is due to a faulty drain pump.

Error code F04

If your Gaggenau washing machine has error F04, there is a fault with the commutator.

• The error code F04 typically occurs when the motor carbon has worn out. You can buy new motor carbon below

Error code F05

If your Gaggenau washing machine has error code 05, there is a fault with the commutator.

• The error code F05 appears when your washing machine's motor carbon has worn out. Find more motor coal below.

Error code F08

If your Gaggenau washing machine has error code F08 when the door is open.

• The error code F08 occurs when the door is open. Closing the door will stop the error. If the error still occurs, the door lock is defective. Find a door lock below.

Error code F16

If your Gaggenau washing machine has error code F16 when the door is open.

• The error code F16 occurs when the door is open. Closing the door will stop the error. If the error still occurs, the door lock is defective. Find a door lock below.

Error code F17

If your Gaggenau washing machine has error code F17, there is a water supply.

• The error code F17 is typically caused by a defective inlet hose with aquastop or a defective solenoid valve.

Error code F18

If your Gaggenau washing machine has error code F18 when the washing machine has problems emptying the water.

• Error code E18 occurs when the washing machine takes too long to drain the water. It could be a clogged filter, clogged drain hose or a fault in the drain pump.

• If cleaning the filter is not enough to get the washing machine running again, the drain hose is probably blocked. Detach the hose and blow into it. If there is resistance, the drain hose is blocked. In some cases, you may be lucky to have the foreign object blown out of the tube. However, in other cases, it will be necessary to be able to take out the foreign body with a tool such as a curtain spiral.

If the error still occurs, the drain pump must be replaced. Find a drain pump underneath.

Error code F21

If your Gaggenau washing machine has error code F21, there is a fault with the commutator.

The error code F27 occurs when the motor carbons in your washing machine are worn out, or for another reason. How to access the motor coals:

• Reset the control module.
• Turn the knob to the off position.
• Close the washing machine door.
• Turn the knob vertically down to "18 o'clock position".
• Wait a few seconds until start/pause starts flashing.
• Press and hold the spin button.
• While still holding the spin knob, turn the knob to the "7 o'clock position".
• Wait for a few seconds and release the centrifugation button and the rotary knob to the off position. Check if the error code is resolved with this.

If the washing machine still shows error code F21, the motor carbons are worn.

Error code F23

When the washing machine cannot get rid of the water, the machine will display error code F23. Follow the steps below and we will find the problem.

1. The error can occur if there is a kink in the hose. Fix the crack so that the water can access the washing machine.
2. If you don't find any cracks, it could be a dirty piece of wood causing problems. You will find the fiber screen behind the cleaning door at the bottom of the washing machine. Take out the sieve and remove dirt and debris from the sieve.
3. It can't just be the wire mesh that needs cleaning. The drain pump may also contain dirt. You can find the drain pump sitting behind the sieve. Also check whether the pump vane can rotate. You can check this with a finger. If it does not rotate, the pump is defective. You can find a drain pump below.
4. If the error code is still displayed after cleaning both the fiber screen and the drain pump, it may be that the drain pump is clogged. Remove the drain hose from the washing machine and blow into it. If there is resistance while breathing, the drain hose is blocked. You can remove the dirt with a curtain spiral, a wooden strip or similar. For best results, soak the drain hose in lukewarm water first.
5. When you have gone through all the steps and still experience problems with Error code E20, it is probably the drain pump that is faulty. This applies regardless of whether the pump vanes are turning or not.

Error code E29

If your Gaggenau washing machine has error code E29, the washing machine does not manage to fill with water within a set period of time. In other words, the water does not enter the washing machine quickly enough.

• If the error code occurs while the program is still running, it is a sign that the drain hose is raised above the height of the drum. This often happens when the washing machine is on a raised platform. By raising the drain hose above the height of the drum, you will solve the problem.
• If the error still occurs after you have done the above, we recommend checking for a kink in the inlet hose on the washing machine. A kink in the inlet hose will prevent the water from being delivered to the washing machine.
• There may be problems with the water supply. Unscrew the hose from the tap, put a bucket under the tap and turn on the water.
• If the water supply is OK, we would recommend checking the filters in the inlet hose. It may be that the inlet hose is limescaled, therefore descale the filter between the tap and the inlet hose and the filter at the back of the washing machine.
• If you have gone through the steps above and the error code E29 won't let you down, it may be because the aqua stop on the washing machine's inlet hose is activated and therefore stops the water before it reaches the machine. You can buy an aquastop below.

Error code F29

If your Gaggenau washing machine has error code F29, there are problems with the water supply.

• The error code F32 typically occurs when an inlet hose with aquastop or a solenoid valve is defective.

Error code F32

If your Gaggenau washing machine has error code F32, an imbalance has been registered.

• The error code F32 occurs when the washing machine is not fully loaded with laundry. This is typically due to when you want to wash bed linen or bath towels. If you wash a large bed linen at a time, it can create an imbalance in the washing machine and will therefore show error code F32. It can also be caused by a faulty level control. Find a level control below.

Error code F33

If your Gaggenau washing machine has error code F33 when too much detergent has been used.

• The error code F33 occurs when foam forms due to too much detergent in the machine. Use less detergent and the error code will stop.

Error code F34

If your Gaggenau washing machine has error code F34, the door is open.

• The error code F34 you can solve the error code by closing the door. If it still shows the error code, the door lock may be faulty. You can find a door lock below.

Error code F37

If your Gaggenau washing machine has error code F34, there is a fault with the commutator.

• The error code F34 is due to the temperature sensor / NTC sensor being defective.

Error code F43

If your Gaggenau washing machine has error code F34, the door is open.

• The error code F34 you can solve the error code by closing the door. If it still shows the error code, the door lock may be faulty. You can find a door lock below.

Error code F44

If your Gaggenau washing machine has error code F34, the door is open.

• The error code F34 you can solve the error code by closing the door. If it still shows the error code, the door lock may be faulty. You can find a door lock below.

Error code F57

If your Gaggenau washing machine has error code F57, there is a fault with the electronics.

The error code F57 occurs when there is a fault in the connection between the control module and another part in the washing machine. The error code typically occurs after the washing machine has been without power for more than 15 minutes, but can also be the result of the control module being broken.

• Check the connection from the control module to all other parts to which it is connected.
• If you find no loose connections, you should disconnect all parts to the control module and then reconnect them one by one.
• If you have tried the above steps and still experience the error code F57, the control modules or the engine management are faulty.

Error code F67

If your Gaggenau washing machine has error code F67

• Error code F67 can occur when the control module is defective, but the error will also occur when the engine carbon is worn out or a defective engine.

Error code KEY

If your Gaggenau washing machine has the error code KEY, the child lock is activated.

The error code KEY is a sign that the child lock is activated. To remove the error code, the child lock must be switched off. If your washing machine has the Finished or - and + buttons, you can try to hold these down at the same time for approx. 3 seconds. If your washing machine does not have the same layout, you must refer to your washing machine's user manual.