Where can I find the information on my product?
What information do I need?
To find spare parts for your product, you can search for resp. 1. Model or 2. Product number. If your product has a product number, you should search for it, as it is more specific than the model.
If your AEG dishwasher displays the error code I5E, there may be a fault with the rinse pump. This can be solved by replacing the rinse pump from your dishwasher.
Find the flush pump hereIf your AEG dishwasher displays the error code I10, there may be a fault in the water supply. This can be solved by replacing the aquastop for your dishwasher.
Find aquastop here
If your AEG dishwasher displays the error code I11, there may be a fault in the water supply. This can be solved by replacing the aquastop for your dishwasher.
If your AEG dishwasher displays the error code I20, the water in the dishwasher cannot be emptied. This can be solved by replacing the drain pump for your dishwasher.
If your AEG dishwasher shows the error code I30, it means that there is water in the bottom of the dishwasher as a result of a leak inside the machine. The first step is to pull out the dishwasher and then gently tip it backwards at a 90 degree angle. This will result in water running out of the bottom of the dishwasher.
the cause may be a drain hose that is pinched, bent or blocked. Check that the drain hose is intact and undamaged. Next, remove the drain hose and inspect it for any foreign objects by breathing through it once removed. If there is no air flow, the drain hose may be blocked. Be aware that there is a backflow preventer in the drain hose, so you cannot blow into it until it is removed. Clean the drain hose and replace if necessary.
If the first step does not work, it may be due to a pinched, bent or blocked drain hose. Check if the drain hose is intact. Then disassemble the drain hose and examine it for foreign objects. You do this by blowing into it when it is removed.
If the error still occurs, it may be due to a leak in the solenoid valve. This can be seen by checking for visible traces of lime around the solenoid valve. If there are limescale traces, it is typically because the solenoid valve is defective.
On newer AEG dishwashers, I30 will also be displayed if the flowmeter is defective. The function of the flowmeter is to register how much water enters the dishwasher, and if the flowmeter is faulty, the dishwasher will continue to take in water until it fills the bottom of the machine with water, until the machine reports error code I30.
Error code I30 can also be caused by faulty spray arms. Check if the spray arms have come apart at the assembly. Replace them if necessary.
Find drain hose here Find spray arms hereHvis din AEG opvaskemaskine viser fejlkode I36, betyder det, at der er vand i bunden af maskinen, som normalt skyldes en lækage. For at afhjælpe situationen, vip forsigtigt opvaskemaskinen bagover med en vinkel på 90 grader for at tømme vandet fra bunden. Efterfølgende kan du følge kalksporet for at identificere det område, der er ansvarlig for lækagen.
Hvis din AEG opvaskemaskine viser fejlkode I40, betyder det, at der er problemer med vandniveauet. Denne situation kan afhjælpes ved at udskifte niveaukontrollen.
Find niveaukontrol herIf your AEG dishwasher displays error code I60, it may be because the machine is not receiving enough water. This problem usually occurs due to a faulty aquastop or solenoid valve. If the water level rises above the level of the heater, the error is typically related to a faulty heater.
If your AEG dishwasher shows error code I70, there is a fault in the temperature sensor. This problem can be remedied by replacing the thermostat.
If your AEG dishwasher displays error code I80, there is an electronic fault. This can either be caused by a faulty control module or other electronic components that are faulty.
If your AEG dishwasher displays error code IC0, this may be due to electronic problems. The cause can either be a faulty control module or faults in other electronic components.
If your AEG dishwasher displays error code IFO, it indicates a fault in the water supply. This problem can be solved by replacing the aquastop.
